Running Preview Server

To run a Preview Server, you need a separate Viz Engine in VGA mode. A Viz Engine generating snapshots for a Preview Server cannot be combined with other tasks like running Viz Trio or Viz Artist.

1. When a Preview Server is up and running, click Settings -> Servers

2. Enter the hostname of the Preview Server in the input field:

   

3. Press the TAB key, Viz Multiplay will fill out the rest of the URL

4. Click Ok

5. The thumbnails should now appear in the GUI if you have graphics in your show or playlist

   Tip:

   The Viz Engine will generate snapshots requested by the Preview Server. This is normally done very quickly. However, it can take a few seconds before the thumbnails appear if your show or playlist contains a large number of elements. After that they should be cached in the Preview Server or in the web browser, so the GUI will redraw quicker.

   Tip:

   Remember that the Preview Server is connected to one or more Viz Engines. These engines are connected to one Graphic Hub database with the scenes and resources. When you later import graphics from different sources (e.g. Viz Trio, Pilot Data Server) the scenes used in these graphics must exist on the Graphic Hub used in the Preview Server. Preferably, you will only have one Graphic Hub on the system containing all your graphics.

See Also

• Preview Server Administrator Guide 3.0.

Create a new show

The first step is to create a new show.

1. Click the Open button:

   

2. Click the Add (+) button in the bottom of the dialog box

3. Give the new show a name

4. Click Ok

   Note:

   The show structure in Viz Multiplay is compatible with a Viz Trio show.

   The Show Pane will now have one tab with the same name as the show, as shown here:

   

   This tab displays the content of the page list in the Viz Trio show.

Differences between Viz Trio and Viz Multiplay

Shows and page lists appear in both Viz Trio and Viz Multiplay, but they behave differently in each program.

In terms of the page list, the difference between Viz Multiplay and Viz Trio is that, in Viz Trio, the page list is mostly used to host pages with unique callup codes. In Viz Multiplay, however, the page list is a free structure that can contain any type of element with any name.

Another difference between a show in Viz Trio and Viz Multiplay is that Viz Trio displays the playlist of elements as a tree structure while Viz Multiplay organizes the playlist per channel. So all elements in a group assigned to, for instance, the channel GFX2 are placed in the row representing GFX2 in the GUI. This is why you must create and activate a profile for your show in Viz Multiplay, because the profile contains the channels Viz Multiplay needs in order to organize the elements.

Create a profile

You need a profile so Viz Multiplay can create one row for each channel in the GUI. The profiles you create in Viz Multiplay are compatible with any Media Sequencer client that uses profiles such as Viz Pilot, Viz Trio etc.

1. Click Settings > Profiles:

   

2. Create a new profile by clicking the Add (+) button at the bottom of the Profiles list

3. Enter the name of the new profile

Create playout channels in the profile

There are two ways to create playout channels in the profile:

1. Create channels manually (usually for a non video wall scenario). In this case, you must add Viz Engines and Video Engines in the window to the right in the Profile Configuration. Then create channels in the middle window and drag engines over to the channels. One channel can contain several engines.

2. Create a video wall. The channels and engines will be automatically created. For now, you can, for instance, create a video wall with 4 GFX channels on localhost.

To create playout channels in the profile

1. Click Settings > Profiles.

2. Click the Add (+) button in the Video Walls list

   

3. Fill in some dummy data in the New Video Wall Setup dialog

4. Click Ok
   

   Tip:

   The channels list in a profile can be reorganized by clicking a channel, holding down CTRL and using the ARROW KEYS to move the channel up or down. This is useful if you want to, for instance, display GFX8 on the top of the GUI in Viz Multiplay. Viz Multiplay draws the channel groups in the order channels are found in the profile.

   Now you have a profile and a show with a page list containing one group called New group:

   

View output channels

You must activate the profile for this show in order to view the output channels in the GUI.

1. Go to Settings > Profiles

2. Click the Activate button for your profile
   

   Tip:

   Activating a profile is a Media Sequencer operation. You now activate your show in this profile for all clients with this show open. Activating a show in a profile means that the Media Sequencer starts monitoring resources in that show, so the operation is potentially resource demanding in the event of a large show that contains lots of media assets. Your show can only be active in one profile.

Basic scene import

For basic scene import, without support for Transition Logic - use the Import scene function directly in Viz Multiplay to import graphics created in Viz Artist. Right-click anywhere and select Import graphics:

See Importing graphics.

Using Viz Trio

Graphics can be imported into Viz Multiplay by using Viz Trio. This is handy if you need to import Tranistion Logic scenes or already have a graphics system running with Viz Trio. In Viz Trio:

1. Select Import Scenes in the Page Editor menu

   

2. Browse the scene tree in Graphic Hub and import the scenes you want to use

   Note:

   You now have one template per scene you imported. These are not visible in Viz Multiplay.

3. Create a page for each of the templates

   Note:

   These pages end up on the root level of the page list in Viz Trio, not visible in Viz Multiplay.

The show workflow and the GFX workflow are the two main ways of working with graphics in Viz Multiplay

The show workflow

This workflow aims to pre-create all the content needed for the Viz Multiplay operator, before the actual show or broadcast starts. This is meaningful if you already have a Viz Trio workflow, or if you have content that changes very little during the broadcast.

In Viz Trio:

1. Create all your content in Viz Trio as pages

2. Drag the pages into the relevant groups in your show.

3. Set a channel on each of the pages to make them appear in the right group channel in Viz Multiplay.

In Viz Multiplay:

1. Drag elements between channels
   
   

The GFX playlist workflow

As your studio increasingly becomes the location for event analysis, you can get more video wall flexibility by allowing the Viz Multiplay operator to fill in content for graphics.

For basic scenes, you can import graphics directly into Viz Multiplay from the Viz Multiplay GUI, or use Viz Trio to create default content (i.e. pages) for the graphics you want to expose to the Viz Multiplay operator. These pages can be dragged down to relevant groups in the GFX playlist in Viz Trio.

The GFX playlist will appear as a tab in the Sources Pane. After completing this Viz Trio is no longer needed. From the GFX playlist, the Viz Multiplay operator can drag graphics into the relevant groups and channels, quickly edit the data in Viz Multiplay and take the element on air.

This workflow is a more rapid, ‘live’ workflow where you can, for example, place a set of graphics in the GFX playlist (nameplates, match results, fullscreens etc.) During the broadcast or event, the Viz Multiplay operator can drag the set of graphics out to the playout channel, fill the graphics with relevant data and take it on air instantly.

Create playlists for shows

A show can also have playlists, as in Viz Trio. You can create new playlists inside the show with Viz Trio or Viz Multiplay. A playlist is usually a subset of the pages in the page list.

In Viz Multiplay:

1. Click the Add (+) button rightmost on the tabs in the Show pane

   

2. A dialog box appears asking whether you want to create a new internal show playlist or create a reference to an external Viz Pilot or MOS playlist. These playlists are compatible with Viz Multiplay.
   

   Note:

   These playlists are compatible with Viz Multiplay. The difference between internal and external playlists is that the internal playlists are owned by the show. They follow the show when exporting it and are deleted when removed from the show. The external playlists are not owned by the show.

Typical use of inboxes are:

• For a special show that is a target for Sequencer Ingest. New ingested material will then appear automatically in the inbox, ready to be used in Viz Multiplay.

• For listing available live source elements. These can be dragged to any group channel in Viz Multiplay and played out.

• For graphics created during the broadcast or event that are imported by a Viz Trio operator into the inbox show. Then the graphics is available instantly in Viz Multiplay.
  To use a show as an inbox:

1. Click Settings > Inboxes

2. Create a new show or select an existing show

3. Drag the show over to the Inboxes list to the right

   

4. The show will now appear in the Sources pane:

   

Setting asset storage

The Viz One setting is global for the Media Sequencer. Configuring this means that the Media Sequencer starts to monitor shows and playlists and transfers assets to the Viz Engines. In case you have a Viz One system, you also need to set the Asset Storage in the video wall dialog box.

Do so by clicking Settings > Profiles and double-clicking the video wall in the selected profile.

Configuring the Media Service

There are two ways to configure the Media Service, as explained below.

By entering the hostname in Media Service

1. Click Settings > Servers

2. Enter the Media Service URL (or hostname) in the Media Service input field
   This setting is private for Viz Multiplay; the Media Sequencer is not aware of it. The Media Sequencer will think that no asset storage is configured. This works fine, because a Media Service is meant to host its clips on the clip root of the Viz Engine, so they do not need to be transferred. But it can lead to some error messages from the MSE and in Viz Trio - so there is another way of configuring Media Service.

By entering the hostname in Viz One input field

1. Click Settings > Servers

2. Enter the Media Service URL (not only the hostname) in the Viz One input field.
   The Media Sequencer now thinks it communicates with a Viz One service - and Media Service uses the same API as Viz One, although no file transfers are needed. Use this method if it is OK that the Media Sequencer is configured with a Media Service. Remember that this configuration is common for all users of the Media Sequencer.

If you use a Media Service, all the Viz Engines must use the Media Service clip folder as their clip root, i.e. a shared disk. This can affect playout performance. If you have a single Viz Engine, a Media Service is well suited to run on the same PC as the Viz Engine, and they both have access to the local clip root folder.

If you have set up a Graphic Hub REST service you have access to images in the Graphic Hub. These images will have best performance when playing them out because they can be pre-loaded. Images from Viz One and the Media Service are loaded when they are played out, and that can produce a small delay.

You can configure all search providers and only search in some of them by checking or unchecking the boxes in the search provider’s list in the search panel.

Example workflow

In Viz Trio:

1. Prepare a show by importing scenes from a Graphics Hub into a show. These scenes become templates in the show.

2. Create pages of the most used graphics and drag them to groups in the GFX playlist.

3. Now, these pages are available for the Viz Multiplay operator.
   In Viz Multiplay:

1. During the broadcast or event, the Viz Multiplay operator selects the page list or a playlist in the Show Pane.

2. Click a group. Now each group channel is populated with the relevant elements.

3. The Viz Multiplay operator sees that he needs a new element (a video, an image or graphics). He finds it in a source (the Media tab, an inbox, the GFX playlist etc.) and then drags it into the channel where it will be played out.

4. The operator can now edit the element by right-clicking and selecting Edit.

Editing elements

Common for all operations is that the changes done on the elements being edited are done ‘live’ on the elements in the Media Sequencer. They are saved immediately and it is not possible to undo.

Setting in and out points in video clips

The operator can scrub through video clips and set new in or out points.

1. Drag a video into the channel where it will be played out

2. Right-click the video and click Edit

3. Scrub in the timeline to where you want to set an in point.

4. Click the Set Mark In icon or press the i key to set an in point

   

5. Click the Set Mark Out icon or press the o key to set an out point

See Also

• Editing Videos

Zooming and cropping images

The operator can add a zoom or crop effect to images.

1. Drag an image into the channel where it will be played out

2. Right-click the image and click Edit

3. Click either Crop or Animation

See Also

• Editing Images

Editing graphics

For graphics, the operator can fill in data into the fields exposed by the scene designer.