API Session Limits

Configuration in Viz Mosart Manus Administrator

From the Manus Admin Console, type settings and configure the following parameters:

• InewsWebServiceConnectionString
  Leave the field blank if you do not wish to connect to any web service.
  The connection string must be given in the format:
  attribute_1=value_1;attribute_2=value_2;...attribute_n=value_n
  Required attributes are:

  • WebServiceServer (host:port). Only the host can be provided if the default port (8080) is used.

  • iNewsServer Only one iNews server can be used by the WebService, specify which iNews server the WebService should connect through. This field is optional if only one iNews server is set in the iNews Configuration.
    Optional attributes are:

  • iNewsUsername Optional as it can be taken from iNews Configuration.

  • iNewsPassword Optional as it can be taken from iNews Configuration.

  • UseItemStatusToNCS (default: false)
    Set to true to update clip status (Online/Offline etc.) when Media Administrator is running.

• IgnoreSendCueStatustoNCSforOfflineClips
  If True, first story does not get Cued for Offline clips if timeline is running.

Configuration Unrelated to iNews Web Service

• IgnoreUpdatesIfNoChanges (default: false)
  If enabled, stories with no relevant changes will not be processed by Viz Mosart. This is to avoid issues with story updates from GUI to be ignored. Later changes in Viz Mosart iNews Web Services API prevented such problems, but for future changes is good to keep in mind this setting together with StoryCompareIgnoreAttributes which is explained below.

• StoryCompareIgnoreAttributes (default: empty)
  List of xml attributes to ignore during comparison. Default set to [date_0, date_1, timestamp] .
  
  When Viz Mosart receives a story in NSML format, it will parse the story and create its own XML format. When irrelevant updates comes from NRCS, some attributes in the Viz Mosart XML story are updated. Currently these are date_0, date_1 and timestamp (see the format of a Viz Mosart XML story in any xml file in C:\manus folder). Attribute date_0 was recently added to the default attributes to be ignored due to the problems with updates caused by Viz Mosart iNews Web Services.
  In future if other attributes cause such issues, than they can be added to the list of attributes to be ignored.

• RefreshMediaOnNCSUpdate (default: false)
  If enabled, it forces updating clips when story is changed in NRCS. This is an old setting introduced before Viz Mosart iNews Web Services.

• KeepStoryStatusOnNcsUpdate (default: false)
  If enabled, will keep the story status on an NCS update, thus keeping the on-air status. The content of the story will be updated, but the story will be gray in the Mosart GUI. This is also an old setting introduced before Viz Mosart iNews Web Services.

Configuration in AvidInewsWebServiceConfig.xml

Copy the configuration file from in Mosart Installation folder\Mosart Server\ConfigurationFiles to the ChannelTemplates folder on C:\.

• SendUpdateStatusForAllItems (default: false)
  By default, only status of items containing clips will be sent (Online/Offline/Cued/Play/Stop).
  Not only clips given through Package or Voiceover are taken into consideration, but also Adlibpix or other ways to insert clip into a story. So for example if a story contains a Camera and an Adlibpix, than the story gets status.

• ClearStatusWhenReload (default: false)
  If enabled, only status column is cleared on reload of the rundown. This is to avoid inconsistent status if, for example, stories failed to be updated because of a crash of Viz Mosart or iNews or Viz Mosart is closed while rundown is playing etc.

• ClearStatusWhenUnload (default: false)
  If enabled, the status will be cleared when rundown is unloaded.

• SetStoryAirDate (default: true)
  Set to false to disable setting the AIR-DATE field and moving the "aired line" (the blue line). Note that the color of the line can be changed from Tools/Options/Colors in the iNews client and choose “Aired” from drop-down box. By default this is blue.

• ClearAirDateWhenReload (default: false)
  If enabled, the air-date field will be cleared during reload of the rundown (empty status). Note that this setting is taken into consideration only if SetStoryAirDate is true.

• ClearAirDateWhenUnload (default: false)
  If enabled, the air-date field will be cleared during unload of the rundown (empty status). Note that this setting is taken into consideration only if SetStoryAirDate is true.

• Color index attributes
  The following parameters are colour index referring to values defined in SYSTEM.COLORS on the iNews system.
  The AIR-DATE field needs to be empty in order to see the correct color for the STATUS field:

• UrgencyIndex (default 1)

• UrgencyIndexONLINE (default 1) – set color for Online status

• UrgencyIndexOFFLINE (default 4 - purple) - set color for Offline status

• UrgencyIndexCUED (default 2 - green) - set color for Cued status

• UrgencyIndexPLAY (default 3 - yellow) - set color for Play status

• UrgencyIndexSTOP (default 1) - set color for Stop status
  

• LockFormSectionOnly (default: true)
  If true will issue a lock on the FORM section of a story, if false will lock the complete story.

• HeartbeatInterval (default: 3 seconds)
  Interval to check Avid Web Service heartbeat.

• UpdateStoriesCacheInterval (default: 1 second)

• RetryStoryUpdateStatusInterval (default: 5 seconds)

• When a story failed to be updated (either because the story is locked for editing, the WebService is down or the iNews server is down), an error message will be displayed in console.
  The retrial to update the story status will continue until the problem is fixed or Manus Admin is closed.

• NoOfStoriesToGet (default: 50) – number of stories to get from iNews for caching

Operation

When the connection to the Avid Web Service is successful the following message will appear in Manus Admin console: <iNews Web Services <host:port> connected>.
The connection will be made after loading a rundown in the GUI.

The following statuses will be shown in iNews:
Cued, Play, Stop, Online and Offline.

Users can move stories in iNews up or down. If rundown is on-air and user has been changed a position of On-Air or Next stories statuses of clips will be changed also according its statuses.

Status for Stories Containing More Than One Item

If a story has more than one item, the following statuses are sent when the story is on-air (keeping in mind that if SendUpdateStatusForAllItems is false the status is not sent if the story does not contain clips):

• PLAY for first item, CUED for next item => thus the story status will be CUED (regardless of SendUpdateStatusForAllItems value)
  

Above illustrates when the first item (camera) in S3 is playing, no “PLAY” status is sent. The Next item is a Package so “CUED” status is sent. In this case, even if SendUpdateStatusForAllItems is true, the “CUED” status will still be sent for the story.

• When F12 is pressed STOP is sent for the first item, PLAY for the second item and CUED for the third item => thus the story end-up with CUED status (regardless of SendUpdateStatusForAllItems value)
  And this will go on until we reach the last item in the story.

• It is only the last item that will send the status PLAY. At any time it is possible to check the AIR-DATE to identify the story currently on-air.

Continuing this example (2 screenshots below), the story S3 has only two items, a Camera and a Package. When we play the clip in the Package, the story gets PLAY status.

The Package from S3 is playing, this is the last item in the story so “PLAY” status is set. Story S4 will get “CUED” because it contains a clip.

Status of an Off-air Story Containing Multiple Clips

The status of an off-air story that contains more than one clip is given by the first clip in the story.

Consider the following example:

1. A story with VID-ID set and containing two clip items.

2. First clip item has id given by the VID-ID field and it’s an Online clip.

3. Second clip item is given an id, for example, through clip_hirespath attribute (Mosart ActiveX) and it is an Offline clip.

4. The story will have the status depending on the availability of the first clip i.e. OFFLINE.

5. If the position of the clips is changed, then the first clip will get 2 IDs, the one from VID-ID and the one given through Mosart ActiveX.

6. The id given through Mosart ActiveX will give the status of the story, i.e. OFFLINE.

Story S2 gets the status of the first clip.

Not able to access Web Service page after installation

If you have problems accessing the Web Services page after installation and deployment (http://<server>:8080/inewswebservice/services), try to delete the Tomcat cache as follow:

1. Stop the Tomcat service.

2. Delete folder Tomcat installation\webapps\inewswebservice (only the folder, not the war file). You may replace the war file, for example, with a new one when upgrading. (This solution is same as deploying from Tomcat manager).

3. Delete folder Tomcat installation\work\Catalina\localhost\inewswebservice

4. Start Tomcat service and try again to access the Web Services page.
   

“No sessions available on X” – Maximum session

If the following error is shown in Manus’s console or the log:
“No sessions available on X”,
where X is the iNews server IP address or hostname, refer to the section API Session Limits.

If this is not the case, then most probably the problem occurred because Manus Admin console failed to release the occupied API session to connect to iNews server through Avid Web Services when this was closed.

Workaround: there are two solutions for this problem. Either restart Apache Tomcat Service or reduce the session timeout in Tomcat to 1 min so that this will free up the API session after 1 min since Manus was closed. If Manus is closed and opened more than maximum API sessions allowed in 1 min, it will reconnect automatically to Web Service after 1 min when at least one session has been released.

To change the session timeout interval do the following:

1. Stop tomcat service.

2. Change Tomcat session timeout interval in Tomcat installation/conf/web.xml to 1 min:
   <session-config>
   <session-timeout>1</session-timeout>
   </session-config>

3. Start tomcat service.
   

“Cannot write to iNews Webservice, connect before selectQueue”

If you get the error message “cannot write to iNews Webservice, connect before selectQueue” you should check that the version of Web Service running corresponds with the version set in iNews.
See section Checking the Current Version of Tomcat.

Cannot get any status feedback in iNews

If after setting up everything as described in the document no status is written in the Status field, check the following:

• The Status field has write permissions for the user used to connect Viz Mosart to the iNews system.

• The type of the Status field is “event-status”
  

• The queue must not be monitored with the iNews Monitor tool.

Avid iNews Web Service Installation

Supported Avid iNews Web Service is 1.6.0.5 or later.

Tested by Viz Mosart with Windows 7, Java 1.7 and Tomcat 6.0.37.
Tested by Avid with Windows Server 2008 R2 SP1, Java 1.7.0_07 and Tomcat 7.0.32.

Refer also to the documentation that comes with Avid iNews Web Service installation package.

1. Download and install the latest JRE, available from oracle.com (Windows offline (64-bit)).

2. Run the executable JRE installation file (e.g. jre-7u7-windows-x64.exe)

3. Download and install the latest stable Tomcat version, available from tomcat.apache.org (32bit/64-bit windows service installer). Recommended tested versions.

4. Run the executable Tomcat installation file (e.g. apache-tomcat-7.0.32.exe)

   1. Select “Normal” installation type.

   2. Create a Tomcat Administrator login user name and password (Do not call the user tomcat!).

   3. Select the JRE installation path if it is not already selected (e.g. C:\Program Files\Java\jre7).

5. Allow C:\Program Files\Apache Software Foundation\Tomcat 7.0\bin\Tomcat7.exe through the Windows Firewall.

6. After the Tomcat installation is finished and has started the Tomcat management page should be available at http://<server>:8080/manager/html.

7. To login on the Tomcat management page, user name and password were defined during Tomcat installation at step 4. b.

8. The default connector port can be modified in Tomcat’s .\conf\server.xml file.
   If port 8080 is used by other applications, this can be changed in Tomcat Installation/config/server.xml file:

   <Connector port="8080" protocol="HTTP/1.1"   connectionTimeout="20000"

    

   redirectPort="8443" />

9. Restart the Tomcat Service after port changed from Services.msc or from Start/All Programs/Apache Tomcat/Monitor Tomcat.

10. An icon is created in the Windows Taskbar.
    Right-click the icon for a list of actions to Start and Stop Tomcat service.

11. Deploy inews web service.war

12. After deployment, the iNews Web Service should be available at http://<server>:8080/inewswebservice/services.

13. If you have problems accessing the Web Services page (http://<server>:8080/inewswebservice/services), try deleting Tomcat cache by following the four steps below:
    

    1. Stop the Tomcat service.

    2. Delete folder Tomcat installation\webapps\inewswebservice (only the folder, not the war file).
       You may replace the war file, for example, with a new one when upgrading. (This solution is same as deploying from Tomcat manager).

    3. Delete folder Tomcat installation\work\Catalina\localhost\inewswebservice

    4. Start Tomcat service and try again to access the Web Services page.

Checking the Current Version of Tomcat

• Go to the Apache Tomcat installation folder /webapps/inewswebservice/META-INF and open Manifest.mf.

• Check the Implementation-version. This version number should be identical the version number specified in the Note above.
  C:\Program Files\Apache Software Foundation\Tomcat 8.5\webapps\inewswebservice\META-INF

• Recommended version is 1.6.0.5 or later.
  It should look like this:

Useful Links

• http://tomcat.apache.org/whichversion.html

• http://java.com/en/download/index.jsp

• iNews Mos Gateway Installation and Operations Manual v2.6.0

• iNews Mos Gateway v4.0 ReadMe

• iNews v4.5 Setup and Configuration Guide

• Introduction to iNews Workstation