XR Set Express Quick Start Guide
Version 1.0 | Published November 25, 2021 ©
Configuration
Hostname Configuration
Some of the following settings depend on the Windows computer name. If required, update the computer name now, restart and then proceed with the installation.
System Startup and Initial Configuration
-
Start Viz Engine.
-
Start Tracking Hub.
-
Start Studio Manager and connect to Tracking Hub.
-
If Tracking Hub is not showing up under Network Adapter PTZ-Camera (192.168.44.10), select Loopback and change Tracking Hub Settings to use PTZ-Camera Network Adapter. Restart Studio Manager and Tracking Hub.
-
Make sure everything is green in Studio Manager.
-
Configure the height of the Camera: Measure from the middle of the lens to the floor or the surface where AR Objects should be located.
-
Enter the value in cm into PosY of Rig2 Camera.
-
Start Viz Arc.
Configure Preview Video
Preview Video depends on the Hostname, if the Hostname has changed and the preview is not working go to System >Configuration: Video Settings and select your local Viz Engine as source.
Login Information
|
Machine |
Login |
|
Workstation |
User: Admin |
|
Panasonic Camera |
User: Admin |
IP Addresses
|
Machine |
IP Address |
|
Camera |
192.168.44.140 to be connected directly to the workstation |
|
PTZ Network on the Workstation |
192.168.44.10 |
|
Second Network on the Workstation |
Dynamic DHCP |